- Model NO.: HI-P168
- Structure: Horizontal
- Plasticizing Way: Screw Type
- Automation: Automatic
- Certification: CE, ISO9001:2008
- Screw Dia.: 50mm
- Shot Weight: 520g
- Trademark: HISSON
- Specification: ISO9001:2000, CE
- HS Code: 8477101090
- Type: Injection Blow Molding
- Plastic Type: Thermoplastic
- Clamping Way: Hydraulic & Mechanical
- Computerized: Computerized
- Clamping Force: 1680kn
- Screw L/D: 25:1
- Tie Bar Distance: 460*460mm
- Transport Package: Nude packing
- Origin: Zhejiang, China (Mainland)
HI-P168 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 168tons, real shot weight 500g.
Machine main components adopt world famous brand, e.g.:
Low voltage contactor: SCHNEIDER(FRANCE),
Low voltage air switch: SCHNEIDER(FRANCE),
Proportional Valve: Dofluid HNC(TAIWAN)
Oil pump: VICKERS(USA)
Directional Valve: VICKERS(USA)
Induction travel switch: OMORON (JAPAN)
Inductor potentiometer: FORT(USA)
HI-P168 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 5g-120g, neck size 8mm to 80mm.
HI-P168 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.
Available mold cavities on HI-P168 PET Preform Injection Molding Machine:
For PET perform 5g-12g, 10mm-15mm, mold cavity can be: 8-Cavities, 12-Cavities, 16-Cavities,
For PET perform 14g-21g, 28mm PCO, 25mm/30mm, mold cavity can be: 4-Cavities, 8-Cavities, 12-Cavities
For PET perform 50g-120g, 60mm-80mm, mold cavity can be: 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities
(Special design for PET)
|TECHNICAL PARAMETER TABLE||Unit|
|SCREW L/D RATIO||L/D||25|
|SPACE BETWEEN TIE BARS||mm||460×460 (W×H)|
|PUMP MOTOR POWER||KW||15|
|Oil Tank Capacity||L||250|
1. This machine adopt special PET screw, prolonged screw and barrel will ensure PET plasticizing effect, to make performs with good brightness and transparence, the production is with low defect.
2. Increased oil pump's power
3. Increased heating ring's power
4. Heaters adopt ceramic, the using life is double than stainless steel.
5. Machine with oil filter system to ensure hydraulic oil clean , to prolong action valves using life.
6. The machine equipped with 7 inch colorful screen controller, brand Techmation from Taiwan, the controller is with several languages include English, French, Spanish, Portuguese, Russian, Arabic etc.
7. The machine equipped with hydraulic protection
8. The machine equipped with double Hydraulic pulling device
9. The machine equipped with double Air Ejector
10. The machine equipped with single slots on the mold plates
Special designed points for PET(for HI-P series injection molding machine)
Characteristics of PET resin
1. melting point: 250-260, molding temperature scope of PET is from 255-290, improved GF-PET can reach 290-315.
2. Low viscosity degree.
3. Strong moisture absorbing ability.
Our machine's special design for PET
L/D:25, this is the standard parameter of our PET series injection molding machine.
Enlarged screw diameter and length.
Increased oil pump's power.
Increased heating ring's power.